Tag: WR250R

• One more ride on the WR250X before winter

  Temps were in the high 40's today and the sun was out, so I decided to get the WR250X out again before winter. Who knows… this might be the last tolerable riding day we have for quite a while. Soon temps will be in the 20's/30's, it will be snowing, and worst of all…they will…

  Written by

  devotechinc

  ·

  November 30, 2010

• New exhaust, high flow air filter, and fuel programmer for our WR250X

  A week or two ago I had some new mods installed on our WR250X. I also had a bone stock base dyno run done, and then the bike was tuned appropriately after the mods were installed. I will post detailed info about all that, including dyno charts, over the next week or so. Here are…

  Written by

  devotechinc

  ·

  November 25, 2010

• Spiral Step Seat for WR250X (and WR250R)

  I'm about 5'9" tall with a 32" inseam, so the WR250X is a bit tall for me. I'm on my tip toes with the stock seat so I wanted to try and lower the seat height without lowering the suspension. I thought an aftermarket seat might help and the Spiral Step Seat worked out perfectly.…

  Written by

  devotechinc

  ·

  November 24, 2010

• Acerbis Rally Pro Handguards for the WR250X (and WR250R)

  Since I still have the stock handlebars on my WR250X, I decided to go with Acerbis Rally Pro X-Strong Handguards. I had read these guards fit the stock bars really well. That turned out to be exactly the case and I got them installed without any problems. I've heard some of the other handguards, like…

  Written by

  devotechinc

  ·

  November 24, 2010

• Edge Tail Light Kit for WR250X and WR250R

  The Edge tail light kit was the first mod I did to the WR250X. In conjuction with a pair of DRC Type 601 LED turn signals, it really cleans up the rear fender area of the bike. Here are the parts I used…. • Edge Tail Light Kit (Red Lens)• OEM Connector Kit (available as…

  Written by

  devotechinc

  ·

  November 20, 2010