-
2011 Yamaha WR250R
View post: 2011 Yamaha WR250RThe WR250R returns for 2011, pretty much unchanged from the 2010 model. The bike looks identical, except for new graphics. Read more at Yamaha's website.
-
One more ride on the WR250X before winter
View post: One more ride on the WR250X before winterTemps were in the high 40's today and the sun was out, so I decided to get the WR250X out again before winter. Who knows… this might be the last tolerable riding day we have for quite a while. Soon temps will be in the 20's/30's, it will be snowing, and worst of all…they will…
-
Ninja 250R Dyno Run
View post: Ninja 250R Dyno RunMy 2009 Ninja 250R currently has the following engine modifications… • Yoshimura TRC Slip-On• Dynojet Stage 2 Jet Kit• K&N High Flow Air Filter I had these parts installed by my local dealer, who does not have a dyno, so they jetted the carb to get the bike running properly, but were unable to tune…
-
Spiral Step Seat for WR250X (and WR250R)
View post: Spiral Step Seat for WR250X (and WR250R)I'm about 5'9" tall with a 32" inseam, so the WR250X is a bit tall for me. I'm on my tip toes with the stock seat so I wanted to try and lower the seat height without lowering the suspension. I thought an aftermarket seat might help and the Spiral Step Seat worked out perfectly.…
-
Acerbis Rally Pro Handguards for the WR250X (and WR250R)
View post: Acerbis Rally Pro Handguards for the WR250X (and WR250R)Since I still have the stock handlebars on my WR250X, I decided to go with Acerbis Rally Pro X-Strong Handguards. I had read these guards fit the stock bars really well. That turned out to be exactly the case and I got them installed without any problems. I've heard some of the other handguards, like…
-
Edge Tail Light Kit for WR250X and WR250R
View post: Edge Tail Light Kit for WR250X and WR250RThe Edge tail light kit was the first mod I did to the WR250X. In conjuction with a pair of DRC Type 601 LED turn signals, it really cleans up the rear fender area of the bike. Here are the parts I used…. • Edge Tail Light Kit (Red Lens)• OEM Connector Kit (available as…
-
Fall ride on the Ninja 250R
View post: Fall ride on the Ninja 250RThe other day I took the 250R out for one last ride before all the fall-colored leaves get knocked down by a big storm headed our way. Temperatures were in the low 70's and riding conditions were near perfect. The fall colors are just past peak and the scenery is awesome. Wonderful day for a…
-
-
Another 100 miler on our WR250X
View post: Another 100 miler on our WR250XToday I spent most of the day over in Brecksville, with a quick run up the Parkway, but it was a bit too cold (high 40's/low 50's) for much more than that. Brecksville was deserted compared to the heavy traffic just a week or two ago when the leaves were at their peak. I love…
Please visit our on-line store at
srmoto.com 