Category: Yamaha WR250X Modifications
-
WR250R / WR250X Edge Tail Light Kit
Click video above for a short overview of the DRC Edge Tail Light kit we installed on our WR250R and WR250X project bikes. Also mentioned in the video is the 12oclock Labs DRC Edge2 Processor Upgrade Board installed in the tail light of our WR250R. The upgrade board is a drop-in replacement for the DRC…
Written by
·
-
Yamaha WR250X DRC Motard Supermoto Footpeg Review
The WR250X comes from the factory with basically a set of dirt bike footpegs. They provide a descent amount of grip, but have a pretty narrow platform for your boots to rest on, and since the pegs have no sliders, they could potentially dig into the pavement if you get the bike real low in…
Written by
·
-
Yamaha WR250R and WR250X Skid Plate
Today I got my new Zeta Racing ED Skid Plate mounted. I don't do any serious off-roading with this bike, but occasionally venture onto some gravel roads and you just never know when a rock or something is going to get kicked up and potentially do some damage. The skid plate mounts to the…
Written by
·
-
New retro look for my WR250X
Even though I really like the all black plastic on my 2009 WR250X, I decided to change up the look of the bike this spring. So, I ordered a set of the Yamaha OEM blue plastics and got some different graphics for the tank shrouds. Still gotta put the blue rear fender on, but…
Written by
·
-
WR250X Tires
After about 3000 miles the stock rear tire on my WR250X was completely shot. I was going to just replace it with another Bridgestone BT-090 Battlax, but decided I wanted something with a little more grip. I've used Bridgestone BT-003's on another bike and really liked them, so that's what I went with. IMHO…
Written by
·
-
Garmin GPS 60CSx for my WR250X
I decided it was finally time to get a GPS for the motorcycle. I have a Garmin Nuvi 765T in my car, but wanted something a bit more worthy of outdoor use for when I'm out riding. Here's the setup you see in the photo above… • Garmin GPS 60CSx Handheld GPS Navigator • RAM…
Written by
·
-
Yamaha WR250X with Delta Barrel 4 exhaust
Here's a short video clip to show how the Delta Barrel 4 exhaust system sounds on my 2009 Yamaha WR250X. Here are the mods I've done to the engine… • Delta Barrel 4 Exhaust System • K&N High Flow Replacement Air Filter • FMF EFI Power Programmer
Written by
·
-
Spiral Step Seat for WR250X (and WR250R)
I'm about 5'9" tall with a 32" inseam, so the WR250X is a bit tall for me. I'm on my tip toes with the stock seat so I wanted to try and lower the seat height without lowering the suspension. I thought an aftermarket seat might help and the Spiral Step Seat worked out perfectly.…
Written by
·
-
Acerbis Rally Pro Handguards for the WR250X (and WR250R)
Since I still have the stock handlebars on my WR250X, I decided to go with Acerbis Rally Pro X-Strong Handguards. I had read these guards fit the stock bars really well. That turned out to be exactly the case and I got them installed without any problems. I've heard some of the other handguards, like…
Written by
·
srmoto.com 